With its single SD card slot supporting UHS-I cards, the Fujifilm X half only shoots JPEG and only shoots 2K video at 50Mbps, so the memory card you choose won’t significantly impact the performance of the camera.
For best results, choose UHS-I V30 cards with write speeds of 90 MB/s or higher. While the X half doesn’t support UHS-II, it can use UHS-II cards at UHS-I speeds, though this isn’t cost-effective.
Fujifilm X half – Amazon / B&H
Top Recommended Memory Cards for the Fujifilm X half
Here are a few of the best memory cards you can buy for the Fujifilm X half.
| UHS-I U3 SD Memory Cards | Tested USB Write | Tested USB Read | Links |
|---|---|---|---|
| Sandisk Extreme Pro 32GB-1TB | 137 | 175 | Amazon / B&H |
| Sandisk Extreme 256GB | 126 | 175 | Amazon / B&H |
| Kingston CanvasGo! 128/256/512GB/1TB | 124 | 161 | Amazon / B&H |
| Lexar SILVER Plus 128-256GB | 166 | 177 | Amazon |
| Transcend Ultra 340s A2 128/256/512GB | 90 | 148 | Amazon / B&H |
Some information about each card.
1. SanDisk Extreme Pro UHS-I (V30)
- Capacity: 32GB, 64GB, 128GB, 256GB, 512GB, 1TB
- Read/Write Speeds: Up to 200 MB/s read, 140 MB/s write
- Speed Class: UHS-I, V30
- Why It’s Great:
- Reliable performance with a lifetime warranty.
- Widely available and budget-friendly for various capacities.
1. SanDisk Extreme UHS-I (V30)
- Capacity: 32GB, 64GB, 128GB, 256GB
- Read/Write Speeds: Up to 180 MB/s read, 130 MB/s write
- Speed Class: UHS-I, V30
- Why It’s Great:
- Reliable performance with a lifetime warranty.
- Widely available and budget-friendly for various capacities.
3. Kingston Canvas Go! Plus UHS-I (V30)
- Capacity: 32GB, 64GB, 128GB, 256GB
- Read/Write Speeds: Up to 170 MB/s read, 90 MB/s write
- Speed Class: UHS-I, V30
- Why It’s Great:
- Good balance of speed and capacity for extended shoots.
- Lifetime warranty for peace of mind.
4. Lexar Silver plus (V30)
- Capacity: 64GB, 128GB, 256GB, 512GB
- Read/Write Speeds: Up to 205 MB/s read, 150 MB/s write
- Speed Class: UHS-I, V30
- Why It’s Great:
- Slightly faster write speeds than competitors, reducing buffer times.
- Durable against water, heat, and drops, ideal for travel.
- Ten-year warranty and consistent performance. For a complete breakdown of what works with Fujifilm bodies, the Fujifilm X-mount lens guide covers every current option.
4. Transcend 340S Ultra Performance UHS-I (V30)
- Capacity: 64GB, 128GB, 256GB, 512GB
- Read/Write Speeds: Up to 160 MB/s read, 90 MB/s write
- Speed Class: UHS-I, V30
Why Card Choice Barely Matters Here — And What to Focus On Instead
The X-Half shoots JPEG only with no RAW option. JPEG files from this camera are compact — the card simply doesn’t see significant write demand. At 2K video and 50 Mbps (about 6.25 MB/s required write speed), even a U1 card could technically handle the video, though V30/U3 is the sensible minimum for reliability. Any name-brand V30 UHS-I card from the list above is already overkill for this camera’s actual demands — which isn’t a bad thing. Buy it once and the card is fast enough for any future camera too.
Where it does matter: reliability. The X-Half is a take-everywhere casual shooting camera, so you want a card that handles the bumps, heat, and humidity of travel — not necessarily one that writes at 90 MB/s. The SanDisk Extreme Pro and Kingston Canvas Go+ both have strong reliability track records for this kind of daily-carry use.
How Much Fits on Each Card Size?
At 50 Mbps video (6.25 MB/s), a 64GB card gives you over 2.8 hours of continuous 2K recording. For JPEG stills, you’d fit thousands of frames on even a 32GB card. The X-Half will not stress any reasonable card’s capacity. A 64GB card is more than enough for most users — go to 128GB if you’re traveling for extended periods without access to a computer to offload.
Frequently Asked Questions
Does the Fujifilm X-Half shoot RAW files?
No. The X-Half is JPEG-only by design — it’s a creative half-frame camera built around in-camera JPEG processing and Fujifilm’s film simulations. There’s no RAW option, which keeps file sizes small and card write demands minimal. If RAW capture is important to your workflow, the X-Half isn’t the right tool regardless of card choice.
Does the X-Half use a full SD card or MicroSD?
Full-size SD. The X-Half uses a standard SD card slot. Standard UHS-I SD cards are what you need — no adapters required.
Does UHS-II make a difference in the X-Half?
No. The slot is UHS-I only. A UHS-II card works but runs at UHS-I speeds. Given how modest this camera’s write demands are, there’s no benefit to paying the UHS-II premium.
What’s the half-frame format and does it affect card use?
The X-Half captures a half-frame sensor format, pairing two exposures together in a vertical diptych — similar to how half-frame film cameras like the Olympus Pen worked. Each pair is saved as one JPEG. The smaller capture area and JPEG-only output means files are smaller than a typical modern mirrorless camera, which further reduces any card speed or capacity requirement. It’s a creative format, not a performance one — and the card requirements reflect that.
- Capacity: 64GB, 128GB, 256GB, 512GB
- Read/Write Speeds: Up to 160 MB/s read, 90 MB/s write
- Speed Class: UHS-I, V30














Leave a Reply